Complete Your Setup

Natural Gas Conversion Kit - Compatible with Festa FPO - BB5000 (16-inch Pizza Oven) Convert your Festa Pizza Oven from propane to natural gas for effortless, continuous outdoor cooking—no more tank refills. This official Festa conversion kit includes everything you need to make the switch safely and correctly, with a typical installation time of 15–20 minutes (recommended to be supervised or checked by a licensed gas technician). Key Benefits Unlimited fuel supply – connect to your home’s natural gas line Quick installation – typically 15–20 minutes Official Festa parts – designed specifically for Festa Pizza Ovens Reliable performance – steady blue flame and consistent cooking Outdoor use only – perfect for patios and outdoor kitchens What’s Included (1) Natural-gas hose with quick-connect fittings (1) Natural-gas regulator (1) Reducer fitting (for adapting to your gas outlet, if required) (2) Natural-gas orifice tips: 2.0 mm (main burner) and 0.85 mm (bottom burner) (1) 6 mm hex wrench (1) 14 mm wrench (1) Roll of Teflon tape (for sealing threaded hose connections) What Else Is Required for Installation (Not Included) Phillips head screwdriver (to remove the bottom panel) Adjustable wrench (to remove the propane hose and tighten fittings) Leak-detection solution / soapy water (required for the post-install leak test) Padded surface (towel, blanket, or cushion) to rest the oven on when turned over and prevent scratches/dents You’ll also need access to a home natural gas outlet with a 3/8 in. NPT male thread (or use the included reducer fitting if required). Compatibility & Requirements Use natural gas only (do not attempt conversion with propane) For outdoor use only (do not install indoors, garages, or enclosed spaces) Performance Specs Recommended operating pressure: 7 in. W.C. (0.25 psi) Nominal gas consumption: 16,500 BTU/hr (top burner) 3,200 BTU/hr (bottom burner) Note: Natural gas models may take slightly longer to reach full temperature than propane models. Installation Notice Fuel conversion should be performed by a licensed gas professional to ensure safe and proper operation. If you choose to perform or have the conversion performed by someone who is not licensed, you accept responsibility for ensuring the installation complies with local codes and safety requirements. Festa is not responsible for damage or performance issues caused by improper installation. Damage or malfunction resulting from improper or non-professional installation is not covered under warranty. We encourage professional installation to ensure safe operation and preserve warranty coverage.

Take your outdoor cooking to the next level with the Festa Pizza Co. Pizza Stand — purpose-built to match the performance of your Festa oven. Engineered from premium metal construction, this stand delivers rock-solid stability, all-weather durability, and a clean, professional aesthetic that looks as good as it cooks. Precision-machined joints and heavy-duty fasteners lock your oven securely at the ideal cooking height, so you can focus on what matters: crafting the perfect pizza. The robust metal frame is built for the long haul — season after season, fire after fire. Four high-quality, oversized locking castor wheels make this stand as mobile as it is sturdy — effortlessly glide your setup wherever you need it, whether that's a backyard party, a patio, or a mobile event. When it's time to cook, the precision locking mechanism keeps everything firmly in place. Integrated utility wings and hanging hooks transform the stand into a fully functional prep station, keeping your tools within reach and your workflow smooth from first stretch to final slice. Stability. Mobility. Craftsmanship. Everything your Festa oven deserves. Dimensions Height 36.25" – 39.25" (adjustable ±3") Width 32" (shelf folded) / 48" (shelf extended) Depth 25" Weight 60 lbs Material Powder-coated Steel Weight Capacity (cart) 400 lbs (181 kg) Weight Capacity (folding side shelf) 30 lbs (14 kg) ⚠️ Important Notice This stand is designed and intended for use with the Festa Pizza Oven. Exceeding the weight limits may compromise the stability of the stand and safety.

Keep your Festa Pizza Oven protected in any season with this premium, heavy-duty cover. Constructed from durable canvas, it provides exceptional strength and long-lasting outdoor performance. Inside, a PVC water-resistant lining adds superior protection against rain, snow, and moisture, helping prevent rust and extending the life of your oven. Designed for a secure, tailored fit, this cover shields your oven from dust, debris, and the elements—ensuring it stays clean, dry, and ready for your next pizza night.

Point. Squeeze. Bake. Instant readings up to 1,202°F — because guessing is not a recipe. The right bake starts with the right temperature. The Festa Infrared Thermometer gives you an instant, accurate surface reading — pizza stone, oven deck, cast iron, or grill grate — so you can fire with confidence and pull a perfect bake, every single time. Features: • Range: -50°C to 650°C (-58°F to 1,202°F) • Response: ~500 ms • 12:1 Distance-to-Spot Ratio — read from a safe distance • Scan Mode: MIN / MAX / AVG • Adjustable emissivity (default 0.95), optimized for most surfaces • Backlit HD display with °C / °F toggle • Low-battery indicator • Auto shut-off after 30 seconds What's Included: • Infrared Thermometer × 1 • AAA Batteries × 2 (installed, ready to use) Certifications: CE | RoHS | Laser Certified Warranty: 1-Year Limited Warranty. Scan the QR code on the included product card for your full User Manual and warranty details. Safety & Disclosures: WARNING: Laser radiation. Do not stare into the beam or point at eyes or reflective surfaces. Keep away from children. CAUTION: Use care around hot oven and cooking surfaces. Battery Safety: Use 2×AAA batteries only. Insert correctly and do not mix old and new batteries. Do not short-circuit, puncture, or incinerate. Keep batteries away from children. This thermometer reads surface temperature only. It does not measure internal food temperature and is not intended for medical use. Festa Pizza Co. · P.O. Box 159, Springville, UT 84663 · support@festapizzaco.com · www.festapizzaco.com Part No. FPC-ITG-01 · © 2026 Festa Pizza Co. All rights reserved.

Festa Aluminum Pizza Screen (16" • 3-Pack) We’ve included a 16" pizza screen like these in your Festa Pizza Oven Essentials Kit. If you’re throwing a larger Festa (i.e., pizza party with a lot of people), having extra screens on hand helps you make pizzas much faster than you could with only one screen. Bake Faster. Crisp Better. Serve Easier. Keep the pizzas flying with this 3-pack of 16" perforated aluminum pizza screens, designed to help you build, bake, and serve pizzas smoothly and efficiently. The perforated mesh design improves airflow under the crust for more even baking and a crisp, restaurant-style finish. Each screen features a seamless rim design for long-lasting durability. With smooth edges that are easy to grip and clean, the seamless rim helps eliminate rough spots and reduces the chances of bent edges over time. Key Features ✅ Perforated Mesh ConstructionPromotes airflow beneath the dough so your crust bakes evenly and crisps up beautifully. ✅ Seamless Wide Rim DesignSmooth edges make it easier and safer to handle pizzas from oven to table. ✅ Durable, Restaurant-Grade AluminumSolid aluminum construction (no plating to flake) delivers reliable performance and even heat distribution. ✅ Easy to Clean + StackableWipe clean with water, dry thoroughly, and stack for simple storage.

The Fornaio Apron, or Baker's Apron, is the apron of choice for the pizza lover who makes it look easy — whether you're running a bustling kitchen or pulling off an effortless backyard pie night with friends. Crafted from a soft, stretch-comfort fabric blend, it keeps you looking sharp and working comfortably from prep to the final slice. Available in rich Indigo and relaxed Stone Blue, it's as stylish as it is hardworking. Features:• 76% Cationic Polyester / 21% Rayon (Modal) / 3% Spandex• Wrinkle-resistant construction• 3 pockets: 1 chest pocket (5" x 5") and 2 lower pockets (7.25" x 8")• Available in Indigo and Stone Blue Dimensions: 27.25" x 33" body, 37.25" waist straps, up to 28" neck strap Care Instructions: Machine Wash Cold. Hang Dry or Tumble Dry Low. Do Not Bleach. Do Not Wring. Do Not Iron Directly. Do Not Dry Clean.

Cut pizza like a pro with the 15" Festa Pizza Rocker Blade. Designed for speed and control, this rocker-style pizza cutter glides through crust with a simple rocking motion, creating clean, even slices without tearing or compressing your toppings. The wide 15-inch blade makes it easy to cut across large pizzas in fewer passes, making it a favorite for home kitchens, pizza nights, and busy food service setups alike. Why you’ll love it Smooth rocking action for quick, effortless slicing 15" wide blade cuts large pizzas in fewer strokes Clean cuts without dragging toppings or crushing the crust Comfortable, stable grip for better control and safety Great for thin crust, deep dish, flatbread, and more From weeknight dinners to party trays, this is the tool that makes slicing fast, satisfying, and consistent. Key Features Blade Length: 16 inches Style: Rocker / mezzaluna pizza cutter Best for: Pizza, flatbread, focaccia, and baked sheets Care: Hand wash recommended; dry immediately for best longevity Ideal use: Home kitchens, pizzerias, food trucks, catering What’s Included 1 × Festa 15" Pizza Rocker Blade Cutter

Festa Pizza Co.™ Perforated Aluminum Pizza Peel (14" x 18") Slide, launch, and serve pizzas like a pro with the Festa Pizza Co.™ Perforated Aluminum Pizza Peel. Designed for smooth handling and clean releases, this lightweight peel features a precision-perforated aluminum blade that helps reduce excess flour buildup—so your crust stays crisp and your oven stays cleaner. With a spacious 14" x 18" rectangular surface, it’s ideal for home pizza ovens, baking steels, and outdoor setups. The extended handle provides confident control while keeping hands safely away from high heat. Why you’ll love it Perforated aluminum blade helps prevent sticking and sheds excess flour Lightweight + durable for easy launching and quick turning Large rectangular surface supports bigger pizzas and calzones Long handle for safe reach in hot ovens Perfect for your Festa Pizza Oven. Product Details Brand: Festa Pizza Co.™ Blade Size: 14" x 18" Overall Length: 32" Material: Aluminum (blade) + handle Shape: Rectangular, perforated Use: Pizza, flatbread, calzones, artisan dough handling Bring the pizzeria feel home with a peel built for cleaner launches, smoother transfers, and better bakes—every time.

Engineered for heat. Crafted for beauty. Elevate your outdoor cooking with the Festa Ceramic-Coated Pizza Stone — a performance-first baking surface designed specifically for the Festa pizza oven. Built from premium 3/8" cordierite and finished with a rich black ceramic coating, this stone delivers the perfect combination of science and style. Features 3/8" Cordierite Core — A dense, porous stone engineered for rapid and efficient heat absorption from the bottom burner Black Ceramic Coating — Applied to the top and sides, the coating promotes superior heat retention for a consistent bake across the entire surface Sleek, Professional Aesthetic — The matte black finish looks right at home in your Festa oven and elevates the look of every cook Purpose-Built Fit — Designed to fit perfectly in the Festa oven for a seamless, no-fuss setup The Science Behind the Stone The porous cordierite base absorbs intense heat directly from the oven's bottom burner, building the deep, radiant heat needed to produce an authentically crisp, restaurant-quality crust. The black ceramic coating on the top and sides seals in that heat, creating a consistently high-temperature baking surface that stays hotter, longer — driving the intense, direct heat responsible for authentic blistering and leoparding on your crust. The Result Crispier bottoms. Authentic blistering. Those coveted leopard-spotted crusts. A stone that looks as good as it performs. Whether you're running back-to-back pies for a crowd or perfecting your signature dough recipe, the Festa Ceramic-Coated Pizza Stone gives you the thermal foundation to cook with confidence — every time. Care & Cleaning The ceramic coating makes cleanup straightforward and the surface renewable over time. Let the stone cool completely before cleaning — never expose a hot stone to water. Apply a scouring powder to the ceramic surface. Scrub lightly with an abrasive scrub brush and water to remove food debris and smooth out any surface scratches. Rinse thoroughly and allow the stone to dry completely before storing or using again. Avoid submerging the stone in water or running it through a dishwasher. The porous cordierite base should be kept as dry as possible.

Break your pizza stone? Burn one too many pizzas and want to restore your oven’s clean, aesthetic look? No problem. The Festa Pizza Oven replacement stone is designed for easy removal and quick replacement, so you can get back to making great pizza in no time. Whether your original stone is cracked, stained, or simply worn from countless bakes, this replacement refreshes your oven’s performance and appearance. Swap it out effortlessly and enjoy even heat, better crusts, and a like-new look for your Festa Pizza Oven.

The Festa Performance Hat delivers classic, retro-inspired style in a lightweight, performance-ready build you’ll want to wear nonstop—whether you’re heading out for the day or firing up the Festa oven to make pizza with friends. Designed for comfort on the move (and around the heat), it features breathable panels, moisture-wicking comfort, and a water-repellent finish—perfect for sunny days, long weekends, and every slice-worthy moment in between. Finished with a flat bill and high crown for a clean, modern silhouette—with select styles featuring a rope detail for an extra throwback touch. Features Water-repellent performance fabric Laser-perforated panels for airflow Moisture-wicking sweatband UPF 50+ protection* Stretch comfort fit Fit & FabricCurved bill | High crown | 5-panel design | Snapback closureSize: Classic (OSFM)97% Polyester, 3% SpandexCare: Hand-wash only *UPF 50+ Protection does not include perforated areas of the hat.